Series 432 / 433 Undermount

432 and 433 Steel Slide Series.  In addition to side mounted slides, Jonathan Engineered Solutions offers slides suitable to be mounted as a “flat under-mount” or “flat bottom-mount” or “flat below-mount” configuration.  The model 433 does provide a positive locking in the fully extended / open position. The model 432 does not provide locking open.  These flat mounted slides offer the following benefits:

• Allows a drawer or chassis to be as wide as possible
• Full travel extension
• Provides a cleaner looking installation
• Eliminate attaching hardware from the sides of drawer or chassis
• Provides a generous load rating over other flat mounted slides
• Slide basic shape profile spreads out the load distribution applied by drawer or chassis
• Low profile 
• Non-metallic outstops and in-stops (basic 432 series without locking)
• Use of heavy gauge materials and greater amount of ball bearing wrap-around
• Ball bearing movement
• Lock Open is available as model 433
• Available options: Detent Closed, Black Oxide Finish, Hole patterns, Hole sizes or additional threaded fasteners pre-installed 

The 423 / 433 series when mounted as a flat under / bottom mount, has the slide height of .75 inch / 19 mm with slide width as 3.00 inch / 76 mm. The 432 & 433 series is a 3-piece full extension device. This series of slides is ideal for applications such as fire truck platforms and trays, display panels, power supplies, utility drawers, sorting machines, and many other industrial installations. In certain applications this series can be mounted as a “top guide slide” to act as an additional stabilizing method in conjunction with lower load carrying slides.  

• 432 model stops in full open position.  
• 433 model has positive lock at the full open position.